What is the #Labocosmetica combined 3pH car wash cycle?
What is the #Labocosmetica combined 3pH car wash cycle?
In washing, every meticulous cleaning action is essential. Often, however, to remove the dirt and contamination that has settled on the bodywork, you need a product with a specific pH.
With the use of the combined pH washing cycle of #Labocosmetica we will obtain the following advantages:
Acidic pH
With an Acid pH we will remove all residues of inorganic origin such as limestone, water stains, acid rain residues;
Neutral pH
With a neutral pH we will remove static dirt during the mechanical action
Alkaline pH
With an Alkaline pH we will remove all residues of organic origin such as road dirt, oil, midges and organic residues
The 3pH combined system by #Labocosmetica is divided into these macro-categories:
Decontamination - MAINTENANCE - PROTECTION
WHEELS AND TYRES
ENGINE
Car WASH
Decontamination/MAINTENANCE/PROTECTION
“Contaminants can reduce protection or even make you think that previously applied protection has disappeared.”
The combined 3pH washing system by #Labocosmetica, thanks to the different pH of the products used, frees the protective agent present on the vehicle from dirt and various contaminations: in fact, each pH acts on different dirt and contaminations.
PRÌMUS 2.0 – Alkaline PH
We start washing using PRÌMUS 2.0 in PreWash mode, differentiating it in the winter season in the presence of more dirt in a 1:30 dilution while in the summer season when the dirt is less in a 1:50 dilution. It can be used as a pre-treatment diluted 1:5 or 1:10 in the areas where the most dirt is deposited, such as the lower part of the doors, the lower part of the trunk or for the removal of midges residues on the front.
PURÌFICA – Acid PH
After having carried out the pre-wash, let’s dispense the PURÌFICA decontaminating shampoo, we will dispense it in foam mode in 1:60 dilution starting from the bottom up. PURÌFICA can also be used as a 1:10 diluted pre-treatment for those areas most exposed, such as the lower part of the doors and the lower rear of the trunk, to the deposit of minerals such as salt and water residues as often happens in the winter season.
SÈMPER – Neutral PH
Let’s move on to the mechanical action we are going to perform with the SÈMPER shampoo. The product is free from waxes or brightness enhancers and its super lubricated formula guarantees extreme smoothness during the washing phase. Its foam has been designed to dissolve, incorporate and hold dirt on the surface of the car in suspension, removing it in a safe but delicate way.
We are going to use SÈMPER in 1:1000 dilution, its neutral pH will allow not to modify the decontaminating action started with the previously dispensing of PURÌFICA favoring a double function both mechanical and chemical decontaminating.
REVÌTAX • NEUTRAL PH AS A PROTECTIVE SHAMPOO
To end of the 3pH protection cycle we will use REVÌTAX , the sealing shampoo with multiple applications depending on the surfaces and seasonality.
A new generation “Wash&Coat” neutral shampoo that allows you to wash, seal, protect and prolong the life of the previously applied coating. On untreated cars, it manages to give a gloss and protection, equal to nano sealants, for at least 3 months.
We will use it in 1:100 dilution and it will be possible to dispense it in foam mode with subsequent application using a glove or sponge, in Nebula pressure pump mode with subsequent application using a glove or sponge or in bucket mode like a simple shampoo.
watch our tutorial on how to wash, decontaminate and keep your car protected with the combined 3ph wash cycle
car wash for rims
"Wheels are a car's calling card, which is why we have to take care of them in the best possible way."
A maintenance wash is an essential step when it comes to maintaining a protective product such as wax, sealant or active nano-ceramic.
Thanks to the different pH of the products used, the #Labocosmetica 3ph combined washing cycle frees the protective material present on the vehicle from dirt and contamination, in fact, each pH acts on different dirt and contaminations.
PRÌMUS – Alkaline PH
To remove all types of organic dirt on rims such as grease, smog, oil, film, organic waste, its VDA certification makes it safe on any type of surface.
Can be used diluted 1:5 or 1:10 as a pre-treatment in areas where the most dirt accumulates, such as the underside of doors, the rear of the lower boot, or to remove midge marks from the front
PURÌFICA – Acid PH
To remove limescale residues and rejuvenate the wax or sealant coating, it solves the root of the problem by effectively dissolving and gently sequestering calcium, deposited mineral deposits and contamination residues caused by acid rain.
watch our tutorial on how to wash car rims with the combined 3ph cycle by #labocosmetica
ENGINE CLEANING
DÙCTILE – Alkaline PH
We start washing using PRÌMUS 2.0 in PreWash mode, differentiating it in the winter season in the presence of more dirt in a 1:30 dilution while in the summer season when the dirt is less in a 1:50 dilution. It can be used as a pre-treatment diluted 1:5 or 1:10 in the areas where the most dirt is deposited, such as the lower part of the doors, the lower part of the trunk or for the removal of midges residues on the front.
DECAFLASH – SOLVENT BASE
It is particularly effective for removing stubborn grease or outdated oil residues from the engine, thanks to its formula we will have the strength of a solvent but with the safety of a simple detergent.
A product, DECAFLASH, really simple to use. After shaking the package, we will spray it on the affected areas, then it will be possible to work it mechanically with the help of a medium-soft brush and when the job is complete, remove the excess with the aid of steam and a cloth. microfiber.
ÈNERGO – ACID PH
It removes heavy limescale and acid rain contamination which often deposits near or inside the engine compartment, significantly shortening decontamination times.
For the removal of mineral residues in the engine compartment or in those surrounding areas where water deposits are favored ÈNERGO is the right product used in a 1:3 dilution.
Dispense the diluted product onto the surface to be treated using a medium-soft bristle brush as you work, wait a few minutes for the product to apply and then remove with steam and a microfiber cloth.
“The watchword is always sweetness: aggression here does not reward. Being delicate and using the right products and accessories is the way to the perfect wash.”
FOLLOW US on our social networks to find out more
Mafra International S.r.L. – Via Aquileia 44/46 – 20021 Baranzate – Milano – Italy – P.iva 09894580969 © 2019 All rights reserved